Description
More Power + More Speakers = Awesome.
320 Watts RMS - True Actual Power
That is 80 watts of continuous power to each speaker.
We start with FOUR top of the line Kicker KSC404 Speakers and paired them with an awesome 4-channel Diamond Audio amplifier that is very small and extremely powerful. The result is Loud and Clear. But why 4 speakers? It's all about better quality and louder volume that's why. We can only squeeze so much sound out of two speakers, and that might be ok for those other guys, but not for you. There are no compromises with this system. 80+mph, Loud Pipes, No Windshield, NO PROBLEM
This system is very loud with distortion free music.
Kicker Speakers in Metal Housings
Diamond Audio Amplifier
Bluetooth Edition (Pair with your phone for wireless audio)
AUX Input (connects to standard headphone jack of your favorite audio device)
Handlebar Mountable Remote Control (glove friendly design)
Handlebar/Highway bar mountable speakers
Complete Easy To Install Kit
Built In Abilene, Texas
If you choose the 5.25" they are on the bigger side, so please make sure you have room on your handlebars/crashbars to mount the speakers, and room in your travel trunk/saddlebag for the amplifier.
Bluetooth Edition with AUX Input, which means you can wirelessly connect the system to your Bluetooth enabled device. If you don't want to use the bluetooth, then the system also has an AUX input so it can be plugged into the headphone jack of your favorite audio device. The remote control is glvoe friendly for easy control while riding, a quick turn in either direction will advance the sound, while turning it in either direction while holding it there will adjust the volume. The remote can be mounted handlebar or if you don't use the bar mount, it can use the existing bolts on your bike to mount to the clutch/brake.
Installation couldn’t be easier
Amplifier hooks to battery terminals, connect speakers to the amp, and plug the Bluetooth into the amplifier and then wire it the battery terminals and to a switched +12V wire (like headlight wire). Then when you start the bike the system turns on/off, there is also an optional hookup method where the system only turns on after you push the power button.
Tech Specs - of Speakers and Amp are listed below
Installation couldn’t be easier
Amplifier hooks to battery terminals, connect speakers to the amp, and plug the Bluetooth into the amplifier and then wire it the battery terminals and to a switched +12V wire (like headlight wire). Then when you start the bike the system turns on/off, there is also an optional hookup method where the system only turns on after you push the power button.
The amplifier can be mounted in a saddlebag, travel trunk, or in a tool/fork bag like one of these SampleBag1, SampleBag2
-
Easy Installation
-
Highway Rated for 80mph+
Amplifier Specs
Elite sound quality and superior power in an ultra compact chassis. The Diamond Audio Micro4V2 4 channel power amplifier sets the standard for high end Harley Specific amplifiers. Featuring ultra efficient full range class D topology, these compact amplifiers deliver huge power for their size.
V2 Micro Amplifiers
Newly redesigned V2 Micro amplifiers have loads of new improvements on an already great design.
-
Advanced Active Crossover Options
-
Selectable Hi-Pass or Low-Pass Crossover When Bridging
-
Bluetooth Expansion Port
-
Selectable 3 Option Auto Turn-On Mode Circuit
-
RMS Power Rating:
-
Max Power: 600 W RMS
-
RMS Power (2Ω): 150W x 4
-
RMS Power (4Ω): 80W x 4
-
Bridged(mono 1Ω): N/A
-
Bridged(mono 2Ω): N/A
-
Bridged(mono 4Ω): 300 W x 2
-
Type
-
Topology: Full Range Class D
-
Power Supply
-
Power Supply: Full PWM
-
Power Supply Threshold: 10.0VDC-17.0VDC
-
Idle Current: (0.7A)
-
Distortion
-
THD 4(1KH@4Ω) : 0.5%
-
S/N Ratio(A weighted@1W): -85dBA
-
S/N Ratio(A weighted@FP): -101.1 dBA
-
Input Sensitivity
-
Low Input Level: 200mV-5.0V
-
Hight Input Level: N/A
-
Input Impedance
-
Low Input Level: 20 KΩ
-
AUX Input Level: 20 KΩ
-
Output Stage
-
Output Impedance: 0.018Ω
-
Damping Factor(50Hz@4Ω): >70
-
Bandwidth(-3dB): 10Hz-35 Hz
-
Crossover(-12dB/Oct)
-
Variable High-Pass: 25Hz-250Hz(front only)
-
Variable Low-Pass: 50Hz-200Hz
-
Variable Sub-Pass: N/A
-
Dimensions
-
Lenght x Width x Height(Inches): 8.39" x 4.05" x 1.38"
-
Lenght x Width x Height(mm): 213.1 x 102.9 x 35
Speaker Specs
Why do we use Kicker Speakers? - We are serious about the components of our products, we cannot make the best products, unless we start with the best components. Before we selected a speaker to use in our systems we ran vigorous lab test, road test, and conduct blind sound test of all high end 4" speakers on the market (including Polk, Infinity, JBL, Pioneer, Kenwood, Alpine, Rockford Fosgate to name a few). We selected the Kicker KSC404 Speakers as the very best sounding and best preforming speakers. When paired with the Diamond Audio amplifiers these Kicker speakers played louder with less distortion and deeper bass response. We 100% believe that these Kicker Speakers are the BEST sounding 4" speakers on the market, so we became an AUTHORIZED Kicker Dealer and choose to use them in ALL of our systems.
-
4" KS-Series 44KSC404 Speakers
-
Locations (handlebars/crashbars/forks)
-
Stainless Steel Waterproof Speaker Housings
-
Stainless Steel Black Speaker Grilles
-
Stainless Steel Mounting Hardware
-
Speaker Size: (5" dia x 4" depth)
-
Continuous Power Handling 75W each
-
Peak Power Handling 150W each
-
4 ohms impedance
-
Frequency Response: 60-20,000 Hz
-
Sensitivity: 88dB
-
High Power Handling
-
Extended Dynamic Range
-
Polypropylene Woofer and Tough Rubber Surrounds
Contents
-
Diamond Audio Amplifier MICRO2V4
-
4 Kicker KSC404 speakers
-
Speaker Mounting Clamps
-
Bluetooth with Aux Input
-
Handlebar/Clutch/Brake Mountable Remote Control
-
4 Cable ties
-
Wire Loom
-
4 Butt Connectors (speaker to amplifier)
-
30 Amp Inline Fuse
-
Power/Ground wires with battery terminals
-
Installation Instructions
Complete Audio System, just add your favorite audio device (phone,MP3 Player, ect)