This Ultra system is just our Platinum System but on steroids. It’s like we took the platinum system, supercharged it, tuned it, and slapped it’s momma, because this system is mean and it screams.

o Upgraded Kicker Speakers
o Upgraded Top of the Line Diamond Audio MICRO82U Amplifier
o This is the most powerful two speaker system in the entire industry. 
    Twice the RMS (actual power) to each speaker than the competition

Loud Pipes, No Windshield, 80+mph - NO PROBLEM! 

Kicker Speakers in Chrome Metal Housings
Diamond Audio Amplifier
Bluetooth Edition (Pair with your phone for wireless audio)
AUX Input (connects to standard headphone jack of your favorite audio device)
Handlebar Mountable Remote Control (glove friendly design)
Handlebar/Highway bar mountable speakers
Complete Easy To Install Kit
Built In Abilene, Texas

Installation couldn’t be easier
Amplifier hooks to battery terminals, connect speakers to the amp, and plug the Bluetooth into the amplifier and then wire it the battery terminals and to a switched +12V wire (like headlight wire). Then when you start the bike the system turns on/off, there is also an optional hookup method where the system only turns on after you push the power button. 

We SMASH the Competition (click for more details)
RMS power is true actual power, really the only way to judge what a amplifier makes or a speaker can take. The Diamond Audio amplifier delivers 200 watts RMS to each speaker (200x2). More than twice the RMS power to each speaker than our competition.  We selected top of the line Kicker speakers are matched to the amplfiier and just really sound awesome when they are cranked up. 

Bluetooth Edition with AUX Input, which means you can wirelessly connect the system to your Bluetooth enabled device.  If you don't want to use the bluetooth, then the system also has an AUX input so it can be plugged into the headphone jack of your favorite audio device. The remote control is glvoe friendly for easy control while riding, a quick turn in either direction will advance the sound, while turning it in either direction while holding it there will adjust the volume. The remote can be mounted handlebar or if you don't use the bar mount, it can use the existing bolts on your bike to mount to the clutch/brake. 
 

Installation couldn’t be easier
Amplifier hooks to battery terminals, connect speakers to the amp, and plug the Bluetooth into the amplifier and then wire it the battery terminals and to a switched +12V wire (like headlight wire). Then when you start the bike the system turns on/off, there is also an optional hookup method where the system only turns on after you push the power button. 

The amplifier can be mounted in a saddlebag, travel trunk, or in a tool/fork bag like one of these SampleBag1, SampleBag2

• Easy Installation
• Highway Rated for 80mph+

Amplifier Specs

Sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers.  Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making it the best in class.  Installation possibilities are endless due to its size and power amplification output.   Even with its small platform, performance and sound quality is never sacrificed with Micro amplifiers from Diamond Audio!  

• RMS Power Rating
  • RMS Power (2Ω): 250W X 2
  • RMS Power (4Ω): 200W X 2
  • Bridged (mono 1Ω): N/A
  • Bridged (mono 2Ω): N/A
  • Bridged (mono 4Ω): 500W X 1
• Type
  • Topology: Full Range Class D
• Power Supply
  • Power Supply: Full PWM
  • Power Supply Threshold: 10.0VDC - 17.0VDC
  • Idle Current: (0.7A)
• Distortion
  • THD 4 (1KHx @ 4Ω): 0.5%
  • S/N Ratio (A weighted @1W): -85dBA
  • S/N Ratio (A weighted @FP): -101.1dBA
• Input Sensitivity
  • Low Input Level: 200mV - 10.0V
  • High Input Level: N/A
• Input Impedance
  • Low Input Level: 20KΩ
  • High Input Level: 20KΩ
• Output Stage
  • Output Impedance: 0.0297Ω
  • Damping Factor (50Hz@4Ω): >250
  • Bandwidth (-3dB): 10Hz - 30KHz
• Crossover (-12dB/Oct)
  • Variable High-Pass: 40Hz - 400Hz
  • Variable Low-Pass: 40Hz - 400Hz
  • Variable Sub-Sonic: N/A
• Fuse Ratings
  • ATC: 25A
• Dimensions
  • Length x Width x Height (Inches): 9 x 4.06 x 1.52
  • Length x Width x Height (mm): 228.6 x 103.124 x 38.608

Speaker Specs

Why do we use Kicker Speakers? - We are serious about the components of our products, we cannot make the best products, unless we start with the best components.  Before we selected a speaker to use in our systems we ran vigorous lab test, road test, and conduct blind sound test of all high end 4" speakers on the market (including Polk, Infinity, JBL, Pioneer, Kenwood, Alpine, Rockford Fosgate to name a few). We selected the Kicker KSC404 Speakers as the very best sounding and best preforming speakers. When paired with the Diamond Audio amplifiers these Kicker speakers played louder with less distortion and deeper bass response. We 100% believe that these Kicker Speakers are the BEST sounding 4" speakers on the market, so we became an AUTHORIZED Kicker Dealer and choose to use them in ALL of our systems. 

• 4" Kicker Speakers
• Locations (handlebars/crashbars/forks)
• Stainless Steel Waterproof Speaker Housings
• Stainless Steel Black Speaker Grilles
• Stainless Steel Mounting Hardware
• 4" Speaker Size: (5" dia x 4" depth)
• 5" Speaker Size: (6" dia x 4" depth)
• Continuous Power Handling 75W each
• Peak Power Handling 150W each
• 4 ohms impedance
• Frequency Response: 60-20,000 Hz
• Sensitivity: 88dB
• High Power Handling
• Extended Dynamic Range
• Polypropylene Woofer and Tough Rubber Surrounds

Complete Audio System, just add your favorite audio device (phone,MP3 Player, ect)

• Diamond Audio MICRO82U Amplifier 
• 2 Kicker speakers in metal enclosures
• 2 Three-piece mounting clamps 
• Bluetooth with Aux Input
• Handlebar/Clutch/Brake Mountable Remote Control
• 4 Cable ties
• Wire Loom
• 4 Butt Connectors (speaker to amplifier)
• 30 Amp Inline Fuse
• Power/Ground wires with battery terminals
• Installation Instructions
• 30 Day Satisfaction Guarantee