livechat
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout


 

 

 

 Checkout
« Previous | Next »
Product ID MT-4AS-HXM800.4D
Insane Amplified Motorcycle Tunes Speaker System
Insane Amplified Motorcycle Tunes Speaker System
1 of 6 (Enlarge)
 Choose the size of the speakers, our standard size is 4" speakers, but we offer an upgrade to a 5.25" speaker which is 31.25% more speaker area than our 4" Speakers, the 5.25" Speakers wil Play Louder and Hit Harder, BUT they are bigger about 6" Diameter housing so putting them on the handlebars might be a bit much, most customers install them on the crashbars.
 Choose the size of the speakers, our standard size is 4" speakers, but we offer an upgrade to a 5.25" speaker which is 31.25% more speaker area than our 4" Speakers, the 5.25" Speakers wil Play Louder and Hit Harder, BUT they are bigger about 6" Diameter housing so putting them on the handlebars might be a bit much, most customers install them on the crashbars.
Price: $729.99
Add to cart
  • Description
  • Tech Specs
  • Contents
Description

480 Watts RMS - True Actual Power 
That is 120 watts of continuous power to each speaker  

 

We start with FOUR top of the line Kicker KSC404 Speakers and paired them with a top of the line 4-channel Diamond Audio amplifier that is marine grade with extreme power. 
Why 4 speakers? It's all about better quality and louder volume that's why. We can only squeeze so much sound out of two speakers, and that might be ok for those other guys, but not for you. This is your prescription, but your neighbors may hate you, because they ain't you. Crank it up, twist that throttle and pick your tunes wisely, it's not just you listening anymore. 

80+mph, Loud Pipes, No Windshield, NO PROBLEM

Bluetooth Edition with AUX Input, which means you can wirelessly connect the system to your Bluetooth enabled device, and/or use the AUX input to plug the system into the headphone jack of your favorite audio device. Includes a glove friendly remote control with push buttons for Power/Track/Play/Pause Volume controls, that mounts to the handlebar or factory handlebar bolts for the clutch/brake. 

 

Go Ahead and Crank Em Up, You'll Love Them!

Installation couldn’t be easier
Amplifier hooks to battery terminals, connect speakers to the amp, and plug the Bluetooth into the amplifier and then wire it the battery terminals and to a switched +12V wire (like headlight wire). Then when you start the bike the system turns on/off, there is also an optional hookup method where the system only turns on after you push the power button. 

 

 

Tech Specs - of Speakers and Amp are listed below

 

Installation couldn’t be easier
Amplifier hooks to battery terminals, connect speakers to the amp, and plug the Bluetooth into the amplifier and then wire it the battery terminals and to a switched +12V wire (like headlight wire). Then when you start the bike the system turns on/off, there is also an optional hookup method where the system only turns on after you push the power button. 

 


The amplifier can be mounted in a saddlebag, travel trunk, or in a tool/fork bag like one of these SampleBag1SampleBag2

  • Easy Installation
  • Highway Rated for 80mph+

Amplifier Specs 

  •         Ultra-compact, high density aluminum alloy chassis provides superior thermal stability
  •         Four layer, glass epoxy circuit board for enhanced performance and reliability
  •         Circuit board conformal coated (water resistant) for marine applications
  •         Full Range Class D amplifier technology
  •         Bridgeable for high power operation
  •         Balanced differential inputs for superior noise rejection
  •         Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input
  •         Input selector switch (2CH/4CH)
  •         Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC)
  •         Fully variable,12 dB per octave, electronic crossover
  •         Full range, line level outputs provided to send signal to another amplifier
  •         Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller
  •         Top mounted controls for convenient adjustment
  •         Integrated soft clip light for quick system set-up
  •         Illuminated logo

RMS Power Rating

  • RMS Power (2Ω):  200 W X 4  
  • RMS Power (4Ω):  120 W X 4  
  • Bridged (mono 1Ω): N/A
  • Bridged (mono 2Ω): N/A
  • Bridged (mono 4Ω): 400W X 2 (4Ω ONLY)

Type
 

  • Topology: Full Range Class D

Power Supply
 

  • Power Supply: Full PWM
  • Power Supply Threshold: 10.0VDC-17.0VDC
  • Idle Current: (0.7A)

Distortion
 

  • THD (1KHz@4Ω) : 0.07%
  • S/N Ratio(A weighted@1W): -77.4dBA
  • S/N Ratio(A weighted@FP): -97.4dBA

Input Sensitivity
 

  • Low Input Level: 0.2mV-10.0V
  • High Input Level: Yes - Up to 25W RMS

Input Impedance
 

  • Low Input Level: 22 KΩ
  • High Input Level:

Output Stage
 

  • Output Impedance: 0.047Ω 
  • Damping Factor (50Hz@4Ω): >250
  • Bandwidth (-3dB): 10Hz-35KHz

Crossover(@12dB per Octave)
 

  • Variable High-Pass: 40Hz - 400Hz 
  • Variable Low-Pass: 40Hz - 400Hz
  • Variable Sub-Sonic: N/A

Recommended Fuse Rating
 

  • ATC: N/A

Dimensions
 

  • Length x Width x Height (Inches): 9.3 x 5.27 x 1.75
  • Length x Width x Height (mm): 237 x 133.9 x 44.5

 

Speaker Specs

Why do we use Kicker Speakers? - We are serious about the components of our products, we cannot make the best products, unless we start with the best components.  Before we selected a speaker to use in our systems we ran vigorous lab test, road test, and conduct blind sound test of all high end 4" speakers on the market (including Polk, Infinity, JBL, Pioneer, Kenwood, Alpine, Rockford Fosgate to name a few). We selected the Kicker KSC404 Speakers as the very best sounding and best preforming speakers. When paired with the Diamond Audio amplifiers these Kicker speakers played louder with less distortion and deeper bass response. We 100% believe that these Kicker Speakers are the BEST sounding 4" speakers on the market, so we became an AUTHORIZED Kicker Dealer and choose to use them in ALL of our systems. 

 

  • Locations (handlebars/crashbars/forks)
  • Stainless Steel Waterproof Speaker Housings
  • Stainless Steel Black Speaker Grilles
  • Stainless Steel Mounting Hardware
  • Speaker Size: (5" dia x 4" depth)
  • Continuous Power Handling 75W each
  • Peak Power Handling 150W each
  • 4 ohms impedance
  • Frequency Response: 60-20,000 Hz
  • Sensitivity: 88dB
  • High Power Handling
  • Extended Dynamic Range
  • Polypropylene Woofer and Tough Rubber Surrounds

 

 

Contents

  • Diamond Audio Marine Grade HXM800.4D Amplifier
  • 4 Kicker Speakers
  • Speaker Mounting Clamps 
  • Bluetooth with Aux Input
  • Handlebar/Clutch/Brake Mountable Remote Control
  • Audio Adapter Cable
  • Cable ties
  • Wire Loom
  • Butt Connectors (speaker to amplifier)
  • 30 Amp Inline Fuse
  • Power/Ground wires with battery terminals
  • Limited Lifetime Warranty
  • Installation Instructions

 

 
Product Reviews

No Reviews For This Product.

Click to review this product

Hands
Motorcycle Tunes

Motorcycle Tunes was founded in 1999 and has continued to lead the motorcycle audio industry with the highest quality products at the lowest possible prices. Our systems are Seriously Loud with Deeper Bass and No Distortion.

o Universal Fit
o Designed for bikes with loud pipes
o Highway Rated
o Factory Quality meets Superior Performance. 
o Made in Abilene, Texas 

For your security
Terms and Conditions
Privacy Policy