The next step towards high fidelity is seperating the highs from the lows properly, and that's where component speakers come into play. These integrated component 5.25" speakers offer a lot of performance in a small package. With the tweeter bridge-mounted over the mid-range cone, you don't have to give up gauge holes to achieve crystal clear quality sound that only component speakers can deliver. Like all of our speakers, they are designed to fit your stock fairing and speaker rings. The performance of component at coaxial prices, these are a nice match-up to any of our amplifier systems.

Note: Not for use in factory rear Tour-Pak speaker pods.

Key Features
 4 ohm impedance for amplifier systems
 1.25" PEI dome bridge-mounted tweeter
 5.25" polypropylene mid-range cone
 10 oz. magnet with rubber boot
 ¼” thick foam gasket on mounting surface
 Sold in pairs

Kit Includes
 2 – SX504-60 Component Speakers

 $30 Mail In Rebate

The next step towards high fidelity is seperating the highs from the lows properly, and that's where component speakers come into play. These integrated component 5.25" speakers offer a lot of performance in a small package. With the tweeter bridge-mounted over the mid-range cone, you don't have to give up gauge holes to achieve crystal clear quality sound that only component speakers can deliver. Like all of our speakers, they are designed to fit your stock fairing and speaker rings. The performance of component at coaxial prices, these are a nice match-up to any of our amplifier systems.

Note: These speakers come with hardware for installing in a Victory Vision fairing. Can be used for rear speaker replacements on the Victory Vision touring package as well.

Key Features
 4 ohm impedance for amplifier systems
 1.25" PEI dome bridge-mounted tweeter
 5.25" polypropylene mid-range cone
 10 oz. magnet with rubber boot
 ¼” thick foam gasket on mounting surface
 Sold in pairs

Kit Includes
 2 – SX504-60V Component Speakers

• Bluetooth® 2.0 high-quality stereo audio bike-to-bike intercom with range up to 100 meters
• Headsets provides 2-channel bike-to-bike communications
• High-quality slim fit stereo speakers (lmm in depth), large mute button for increased safety
• Full face (soft wire) microphone and/or boom microphone provide unmatched noise cancellation
• Easy mounting via clip-on mounting system or double sided tape mount fits to any helmet
• Full duplex wireless intercom, micro USB headset connector allows easy transfer between headsets
• Battery duration is estimated at 7-14 hours of usage
• Includes, stereo speakers, AC charger, microphone, clip mount, double sided tape mount and waterproof case

Want to make installing an aftermarket radio a cake walk? Well here you go. We've combined all three of our DIN Sony radio installation products into one kit. Includes everything needed to install supported Sony radios in your factory fairing (except for the radio, of course).

click the picture to see compatiable sony/pioneer cd players with this setup.

Want to to be able to insall a Pioneer, Alpine, Kenwood, JVC, or Clarion CD/MP3/XM Radio Upgrade and still be able to use your OEM hand controls?

Hate the idea of hacking up your stock wiring harness to make it happen? Well here you go.  

Includes everything needed to install supported radios in your factory fairing (except for the radio, of course).

click the picture to see compatiable cd players with this setup.

This is only 1 part of the 3 parts you will need for your custom muffler. You will need all three parts below for a complete muffler.
Front Pipe Model (this item)
Exhaust Silencer Model
Silencer Tip Model

This is only 1 part of the 3 parts you will need for your custom muffler. You will need all three parts below for a complete muffler.
Front Pipe Model (this item)
Exhaust Silencer Model
Silencer Tip Model

Voted Best System with Built in Amplifier 

Complete system, simply connect your music source to the 3.5mm jack, and you’re ready to ride.

Already upgraded your speakers, but still not enough?

this plug and play amplifier will boost the output of your factory radio.

Click the picture for more information on this item.

With real aluminum cones and butyl rubber surrounds, our premium motorcycle audio products offer more durability and audiophile sound quality than standard factory paper cone speakers or other after market polypropylene cone speakers. The aluminum cone design stands up better to the elements, as well as, the vibration of the motorcycle. These are the highest quality speakers available, offering you brilliant sound no matter how fast you’re cruising!

The motorcycle speaker kit includes our FAST-HD Plug and Play interface cable with OEM connectors that plug directly into the factory Harley Davidson harness. This allows for seamless integration of the amplifier into the Harley system and maintains full use of all factory handle bar controls.Each kit includes a 4-channel 200-watt amp that easily mounts under the front faring. (removal of the front faring cover is required)

The MC-HD-AK4 motorcycle audio kit works on all FLH Harley models from 1985 to present for Harley FLH models:
FLH Electra Glide
FLH Standard
FLH Classic
FLH Ultra Classic
FLTR Road Glide bikes

Known Exceptions: This product will not work on 1997 Classic and Ultra Classic bikes with a Built-in CB Radio, 1999 Ultra Classic with a Built-in CB Radio, 2004 Electra Glide, 2002 Electra Glide or Electra Glide Ultra Classic with a Buillt in CB Radio, or 2003-2004 Ultra Glide with a built in CB Radio.

Before purchasing this product, All Bikes make sure the head unit will accept one 35 pin and one 23 pin connector and, ALL Bikes with a Built In CB Radio should be measured for clearance under the faring.