Replaces any 5.25" Motorcycle Speaker

• 25 Watts Nominal Power
• 1-3/16" PEI Balanced Dome Tweeter
• Metallic Silver IMPP Composite Cone Woofer
• High-Energy Neodymium Magnet and Aramid Fiber Damper
• Shallow mounting depth for easy install into a wide variety of vehicles
Frequency response: 40Hz-25kHz
• Sensitivity (1W/1M) 89dB
• Ohm rating: 4
• Mounting depth: 1-13/16" (46mm)
• Cut-out dimensions: 5-1/8" (129mm)

Aftermarket Fairing ?
FLHT Standard or Police bike?
Want some music, at a reasonable price? This is the setup allows you to listen to your Satellite Radio, MP3, iPhone, etc.  at highway speeds.

While upgrading your sound system, your project will require a speaker that fits where you need it and can handle the job, these Neodymium 5.25" coaxial speakers are up to the task while shedding the weight. They are designed to fit your stock fairing and speaker rings, as well as in rear Tour-Pak speaker pods, and are a nice match to any of our amplifier systems.

Key Features
 4 ohm impedance for amplifier systems
 1" PEI dome coax-mounted tweeter
 5.25" polypropylene mid-range cone
 Neodymium magnet with aluminium heat sink
 ¼” thick foam gasket on mounting surface
 Sold in pairs

Kit Includes
 2 – RX504-50 Coaxial Speakers

This pair of 5.25" coaxial speakers are a perfect fit replacement for your 2006-newer Harley-Davidson factory sound system. They are designed to fit your stock fairing and speaker rings, as well as in rear Tour-Pak speaker pods, and provide a cost effective speaker replacement for newer bikes. The highly efficient Neodymium magnets keep the weight down while still serving up the sound.

Key Features
 2 ohm impedance for 2006-newer H-D
 1" PEI dome coax-mounted tweeter
 5.25" polypropylene mid-range cone
 Neodymium magnet with aluminium heat sink
 ¼” thick foam gasket on mounting surface
 Sold in pairs

Kit Includes
 2 – RX502-50 Coaxial Upgrade Speakers

The next step towards high fidelity is seperating the highs from the lows properly, and that's where component speakers come into play. These integrated component 5.25" speakers offer a lot of performance in a small package. With the tweeter bridge-mounted over the mid-range cone, you don't have to give up gauge holes to achieve crystal clear quality sound that only component speakers can deliver. Like all of our speakers, they are designed to fit your stock fairing and speaker rings. The performance of component at coaxial prices, these are a nice match-up to any of our amplifier systems.

Note: These speakers come with hardware for installing in a Victory Vision fairing. Can be used for rear speaker replacements on the Victory Vision touring package as well.

Key Features
 4 ohm impedance for amplifier systems
 1.25" PEI dome bridge-mounted tweeter
 5.25" polypropylene mid-range cone
 10 oz. magnet with rubber boot
 ¼” thick foam gasket on mounting surface
 Sold in pairs

Kit Includes
 2 – SX504-60V Component Speakers

The next step towards high fidelity is seperating the highs from the lows properly, and that's where component speakers come into play. These integrated component 5.25" speakers offer a lot of performance in a small package. With the tweeter bridge-mounted over the mid-range cone, you don't have to give up gauge holes to achieve crystal clear quality sound that only component speakers can deliver. Like all of our speakers, they are designed to fit your stock fairing and speaker rings. The performance of component at coaxial prices, these are a nice match-up to any of our amplifier systems.

Note: Not for use in factory rear Tour-Pak speaker pods.

Key Features
 4 ohm impedance for amplifier systems
 1.25" PEI dome bridge-mounted tweeter
 5.25" polypropylene mid-range cone
 10 oz. magnet with rubber boot
 ¼” thick foam gasket on mounting surface
 Sold in pairs

Kit Includes
 2 – SX504-60 Component Speakers

With real aluminum cones and butyl rubber surrounds, our premium motorcycle audio products offer more durability and audiophile sound quality than standard factory paper cone speakers or other after market polypropylene cone speakers. The aluminum cone design stands up better to the elements, as well as, the vibration of the motorcycle. These are the highest quality speakers available, offering you brilliant sound no matter how fast you’re cruising!

The motorcycle speaker kit includes our FAST-HD Plug and Play interface cable with OEM connectors that plug directly into the factory Harley Davidson harness. This allows for seamless integration of the amplifier into the Harley system and maintains full use of all factory handle bar controls.Each kit includes a 4-channel 200-watt amp that easily mounts under the front faring. (removal of the front faring cover is required)

The MC-HD-AK4 motorcycle audio kit works on all FLH Harley models from 1985 to present for Harley FLH models:
FLH Electra Glide
FLH Standard
FLH Classic
FLH Ultra Classic
FLTR Road Glide bikes

Known Exceptions: This product will not work on 1997 Classic and Ultra Classic bikes with a Built-in CB Radio, 1999 Ultra Classic with a Built-in CB Radio, 2004 Electra Glide, 2002 Electra Glide or Electra Glide Ultra Classic with a Buillt in CB Radio, or 2003-2004 Ultra Glide with a built in CB Radio.

Before purchasing this product, All Bikes make sure the head unit will accept one 35 pin and one 23 pin connector and, ALL Bikes with a Built In CB Radio should be measured for clearance under the faring.