livechat
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout


 

 

 

 Checkout
Product ID 8070-KickerB
INSANE Amplified Motorcycle Speaker System BLACK BLUETOOTH EDITION
INSANE Amplified Motorcycle Speaker System BLACK BLUETOOTH EDITION
1 of 6 (Enlarge)
Price: $769.99
Add to cart
  • Description
  • Tech Specs
  • Contents
Description

Since 1999 Motorcycle Tunes has built the best systems for the lowest possible prices. These Insane Speakers use Two, that's two seperate 1000 Watt Amplifiers to power 4 speakers . That's 2 Speakers on the Handlebars, 2 Speakers on the Crashbars and One Big Smile on your face!   You will love everything about this system. 

Bluetooth Edition with AUX Input, which means you can wirelessly connect the system to your Bluetooth enabled device, and/or use the AUX input to plug the system into the headphone jack of your favorite audio device. Includes a glove friendly remote control with push buttons for Power/Track/Play/Pause Volume controls, that mounts to the handlebar or factory handlebar bolts for the clutch/brake. 

This system uses two amplifiers, and they will need to be mounted in the travel trunk/saddlebag or in a fork/sissybar bag. 

Go Ahead and Crank Em Up, You'll Love Them!

 

Tech Specs - of Speakers and Amp are listed below

 

Simple Installation: Instructions are included, but our kit is designed to be easy for self-install. Basically, the system wires to positive and negative battery terminals, and to a switched and fused power supply on your bike (headlight wire/fuse box) so that it turns on/off with the key. Then the speakers connect to the amplifier by the butt connectors. The amplifier either plugs into the headphone jack of your device, or to the Bluetooth controller, and you're are ready to ride! We made the installation simple, but if you don't feel comfortable contact your local car audio shop and they can install for you. 

The amplifier can be mounted in a saddlebag, travel trunk, or in a tool/fork bag like one of these SampleBag1SampleBag2

  • Easy Installation
  • Highway Rated for 80mph+

Amplifier Specs (two seperate amplifiers are included)
these specs are per amplifier

  • Peak power output: 1000 watts
  • RMS Power Rating: 4 ohms: 200 watts x 2 chan
  • LED power and protect indicators
  • Selectable turn-On modes: REM / DC / VOX
  • Input sensitivity: 200 mV - 10 V
  • Frequency Response: 10 - 33,000 Hz
  • Total Harmonic Distortion (THD): 0.25%
  • Signal to Noise Ration: 101.7 dBa
  • Selectable crossover mode: HP / Flat / LP
  • Variable low/high-pass filter: 40 - 400 Hz
  • Amplifier Size: 1.4"H x 4.02"W x 6.61"D
  • Signal to Noise Ration: 101. dB
  • Class D IR Chipset
  • DirectFET power MOSFET Output
  • Ultra-compact high-density aluminum alloy chassis
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Advanced rollback/thermal protection
  • Frequency Response: 10Hz - 33KHz

Speaker Specs

Why do we use Kicker Speakers? - We are serious about the components of our products, we cannot claim to have the best, unless we use the best components.  Before we select a speaker to use in our systems we run vigorous lab test, road test, and conduct blind sound test of all high end 4" speakers on the market (including Polk, Infinity, JBL, Pioneer, Kenwood, Alpine, Rockford Fosgate to name a few). We selected the Kicker KS-Series Speakers as the best sounding and best preforming speakers. When paired with the Cerwin Vega amplifier these Kicker speakers played louder with less distortion and deeper bass response. We 100% believe that these Kicker Speakers are the BEST sounding 4" speakers on the market, so we became an AUTHORIZED Kicker Dealer and choose to use them in ALL of our systems. 

  • 4" KS-Series 44KSC404 Speakers
  • Locations (handlebars/crashbars/forks)
  • Stainless Steel Waterproof Speaker Housings
  • Stainless Steel Black Speaker Grilles
  • Stainless Steel Mounting Hardware
  • Speaker Size: (5" dia x 4" depth)
  • Continuous Power Handling 75W each
  • Peak Power Handling 150W each
  • 4 ohms impedance
  • Frequency Response: 60-20,000 Hz
  • Sensitivity: 88dB
  • High Power Handling
  • Extended Dynamic Range
  • Polypropylene Woofer and Tough Rubber Surrounds

 

Contents

  • 2 Cerwin Vega Stealth Amplifiers
  • 4 Kicker KS Series
  • Speaker Mounting Clamps 
  • Bluetooth with Aux Input
  • Handlebar/Clutch/Brake Mountable Remote Control
  • Audio Adapter Cable
  • Cable ties
  • Wire Loom
  • Butt Connectors (speaker to amplifier)
  • 30 Amp Inline Fuse
  • Power/Ground wires with battery terminals
  • Limited Lifetime Warranty
  • Installation Instructions

 

 
Product Reviews

No Reviews For This Product.

Click to review this product

Hands
Motorcycle Tunes

Motorcycle Tunes was founded in 1999 and has continued to lead the motorcycle audio industry with the highest quality products at the lowest possible prices. Our systems are Seriously Loud with Deeper Bass and No Distortion.

o Universal Fit
o Designed for bikes with loud pipes
o Highway Rated
o Factory Quality meets Superior Performance. 
o Made in Abilene, Texas 

For your security
Terms and Conditions
Privacy Policy